| SDek Rail - Integrated LED Installation Instructions | |
|
Specifications: Model: 12V DC Flexstrip Pure white (5000k) LED 3 x led units per flexstrip at .625 o.c. 3 x 3528 SMD per unit at 0.24 watts per unit 0.02 Amps per unit Outdoor style with silicone jacket Est. life cycle: Approx.30,000 hours Power Supply: 10 Watt LED Driver Unit - Supplied with LED kit INPUT: 120V AC current - Standard house current OUTPUT: 12V DC current Constant voltage: LED units are not dimmable Max. recommended tri-light LED units per string: 30 / 150 linear feet of main feed wire Main Feed Wire: 2-12, low volt, black, outdoor landscape wire Available from most major hardware stores such as Home Depot or Lowes Also available from contractor / electrical supply stores Stranded version wire only - not solid core Please only use this specific wire Notes: Please only use the supplied LED driver unit to power the Dek Rail, tri-light LED's. Do not use any other power supply. Do not power any other low volt lighting from this supplied power source or permanent damage to these LED units may occur. We highly recommend that you install the supplied LED driver unit in an easy to access location. Even though it is possible, we do not recommend you hardwire your 120V AC directly into the LED driver unit. The unit should remain a plug-in type with the supplied set-up via AC cord. The unit can be plugged into a standard outdoor wall socket. On an off function for the lights can be controlled via an indoor wall switch which supplied and cuts power to that specific wall plug. In the event the LED driver unit needs to be replaced, the AC cord can simply be unplugged from the wall socket. |
|